CATU - Live Working Tools

Live Working Tools

Utilities would be better off efficiency of their networks by avoiding outages,whatever the costs. With the increasing recognition of EDF-Serect worldwide, CATU is fast becoming a major supplier in liveline working equipment. All the tools meet the specifications of the International Electrotechnical Committee (IEC) ...more

CATU - IEC short-circuiting and earthing systems for MV substations

IEC short-circuiting and earthing systems for MV substations

These equipment are intended for connection: to permanent fixed points or to bare conductors.
They consist of 3 contact clamps. Comply with IEC-61230 ...more

CATU - Telescopic and disconnect telescopic sticks

Telescopic and disconnect telescopic sticks

Sections made of reinforced high density electrical grade fiber`glass ...more

CATU - Arc flash protective hood kit

Arc flash protective hood kit (40cal/cm2)

In many countries regulations have been established to protect workers from electrical shock and flash hazards in specific areas within which arc flash protection is required. These equipment must be used with insulating gloves and leather overgloves. Equipment up to 100 cal/cm2 on request ...more

CATU - Electronic Voltage Detectors

63 to 550 kV electronic voltage detectors for indoor and outdoor use

Designed to give users maximum safety, the DETEX detectors of the CC-245 Series are the result of the most modern developments in electronic research. They offer a number of important properties and advantages ...more

IEC Electronic Voltage Detectors

"Compact serie" for indoor and outdoor use Ultimate technology of voltage detector "Head Capacitive Technology" ...more

IEC short-circuiting and earthing systems (three-phase crossarm networks)

MT-613 clamps are automatic contact clamps. They are put into position from above the conductor, using the clamp dispenser head MT-635/1-C, which gives remarkable rapidity and ease of handling. Removal is carried out by pulling down the clamp, which revolves around the conductor by means of the pig tail fixed in the centre of the clamps dispenser head. Comply with IEC-61230 ...more

Insulating sticks for short-circuiting and earthing systems

These 39 mm dia. elements are assembled using a new safety bayonet system connector in aluminium alloy.They allow construction of a large variety of custom made sticks that meet the most varied conditions of application.Calibrated lengths of 1 to 3 meters (with fraction of 0.50 m) permit a huge number of applications. This range thus allows a stick-length limitation in case of space requirements and carrying capabilities. For common applications a serie of complete sets including 2 or 3 elements are made to give simple solutions for working ...more

Life saving kits for M.V. substations

In case of an electrical accident, quick response is essential: seconds gained or lost can decide the life or death of a victim. Our life saving equipment is designed to make all necessary materials immediately available to rescue personnel ...more

Low voltage complete set

Complete equipment for live line (L.V.) interventions ...more

Telescopic sticks for voltage detectors

Telescopic stick contains 2 elements made of resin polyester/glass fiber foam filled tube, which slide together and are equipped with a push button lock ...more

Working on pole kits

Composition:
1 harness belt ref: MO-71-M or MO-71-L
1 anti full grip with 15 meters of rope réf: MO-68/15
2 Snap hooks ref: MO-55/1
1 carrying bag ref: M-87295 ...more